We present the new line of products for stains manuals of RAL diagnostics.
Due to the success of the RAL Stainer, we have basically focused on the stains of Gram and Auraminas.
KIT RAL 555
The same kit that we have for the Ral Stainer but in manual version.
This is a quick hematology stain. The complete protocol lasts between 15 seconds and 3 minutes. It is the equivalent of the Quick Diff or the optical that they use in many hematology labs.
The advantage of this kit is that the reagent bottles are ready, the staining is done by dipping the ports in them. Unlike competing kits it does not require any reagent dilution so it saves Labor and standardizes staining.
It is used as a screening in hematology and cytology.
MGG + BUFFER
The traditional staining of May Grünwald Giemsa.
It consists of 3 reagents: May Grünwald, GIEMSA (diluted with buffer) and buffer used to prepare the GIEMSA and for rinses
The GIEMSA solution is available in two versions, the R, which is the standard (tints in 10 minutes) and the slower-acting L (20 minutes) and is used for wet samples and tissue sections. Customers will use R generally,
Our MGG reagent has 2 advantages:
-Dilution 1/20 or 1/30: One of the most concentrated in the market, is diluted to 1/20 or 1/30 with the buffer, according to the protocol used.
-PH Buffer: Used for staining instead of water. It makes the staining much more stable and homogeneous over time. The constant PH produces a better stain, the GIEMSA solution lasts longer and allows to standardize the results. It also makes it easier to clean the instruments (staining glasses) once used, thus producing fewer artifacts in future stains.
ph Buffer is available in 3 different ph: 6.8, 7.0 and 7.2. &. 8 and 7.0 are for hematology, usually the 7.0 is used. 7.2 is for parasites.
It is the modification of the MGG to run without methanol. It is a reagent patented by RAL Diagnostics.
-no dilution is necessary. In this way the staining is still more standardized and facilitates the work of the laboratory staff.
-High reagent stability, always obtaining good quality staining.
Reagent for the diagnosis of leukemia.
Once again it is a safe reagent because it is not toxic. The standard for myeloperoxidase staining uses benzidine that is toxic.
It is a standardized and reproducible method. All consumables and reagents are already included in a single kit and prepared with drip systems for ease of use.
The staining protocol is fast as it lasts only about 10 minutes.
Reagent for the staining of ferric salts through the reaction of Prussian blue.
The kit includes everything you need for staining.
Fluo Ral Blue
We take the opportunity to present the Auraminas kit for RAL Stainer with blue background, Fluo RAL Blue, for users who may prefer it to the original kit with red background.
The kit has a stability of 14 days.